LayersFactory
Zgłoś model
1 / 8
Commander (EDH) Deckbox With Compliant Mechanism Locking Lid — zdjęcie 1
1 / 8

Commander (EDH) Deckbox With Compliant Mechanism Locking Lid

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

actionjacksonfm

actionjacksonfm

@actionjackson_303633

Deckbox that holds over 100 Double sleeved Sealable cards, with tokens, and commander in toploader with a locking lid.

Ocena
0 / 5
Polubienia
1
Pobrania
21
Wydruki
0
Wyświetlenia
221
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Toys & Games
Licencja
Creative Commons — Attribution — Noncommercial
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (6)Powiązane

This is a Commander (EDH) deckbox with a compliant mechanism locking lid to keep the contents secure. 

Printed Parts

All parts were printed on a MK4S. Parts should be oriented for print.

You should print, in this order:

  1. Top Locking Mechanism x2
  2. Deckbox Bottom & Deckbox Top

Individual Printed Part Notes:

  • Top Locking Mechanism
    • Print in PETG or other material good for compliant mechanisms
    • Change seams to Random
    • Enable Scarf Joints Everywhere
    • Make sure fill gaps is checked
    • Change the Perimeter Generator setting to Arachne. 
    • I used 0.10 Fast Detail Setting.
    • No supports
    • I have included an example project with those settings in the attached files
    • After printing allow the part to cool completely, then gently lift the back of the mechanism up to free anything the got stuck together during printing. Gently but firmly do the first few in/out movements of the mechanism by hand to get the plastic used to bending.
  • Deckbox Body (Top and Bottom)
    • I printed in PLA
    • I used 0.25 Structural slicer setting
    • No supports.
    • Important: Make sure there is a pause at the last layer before the rail surface is started, you need to insert the lid locking mechanisms into the slots at this point. Here's a screenshot of the layer the pause should be inserted on. If you advance the slicer timeline a step, you should be able to see the locking mechanism pocket start to be covered in the next layer.
    • When the print pauses, insert the locking mechanisms. The side with the circular divot should face outward on each side. The part of the mechanism that moves out from the body should be oriented upwards (The solid edge is the bottom)

Notes

Opening the box is done by pushing the lock mechanism downward. Up will lock the lid in place.

You can remix this project in OnShape by copying it into your own workspace. The project url is: https://cad.onshape.com/documents/27e6b91d5eae335ec6d35cac/w/aa3ad79d0a5f5abc5b2177a5/e/e47647fc82e67ac84f61f979?renderMode=0&uiState=6913f7869e5f3baaf03666ed

Tagi

mtgcommanderdeckboxmtgboxmtgedhmtgaccessoriescommanderdeckbox