Husky 1/4 Inch Socket Rail Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip for a Husky brand 1/4 inch socket rail
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 598
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
A clip for a model of the plastic Husky ¼ inch socket rail, with a trapezoidal profile. Rather than buying another socket rail for just two more clips, I decided to design these instead.
There's another model with a curved top on the Home Depot website, and I see review photos from 2016 with that profile. Perhaps I have a newer model and Home Depot hasn't updated their store page.
My packaging has the model number H4DRAIL-02 on it, just check before you print.
Print Instructions
Print in the downloaded orientation, using PETG and a 0.4mm nozzle. This looks like it should work with a 0.6, but I haven't tested that yet.
I tuned the fit with the rail and socket for PETG, and haven't verified that the fit is the same for other filaments like ASA or PLA.
I found that a brim was unnecessary when I printed 1-2 of these at a time, but you may need it if you are printing more at once.