1 / 5
Parts Box Container for Small Parts (Stackable - Different Layers Parts Box)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This small parts box container can be used for many small parts and has 6 sections per layer plus a lid with snap fits.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This model is made for holding many small parts. It was originally designed for watch parts, but it can hold screws, nuts, whatever is necessary. It has 3 different layers each with different depth sections. It also has a lid
For reference, the diameter of the sections is 85mm, and the height of each section is 19mm.
The tolerances for the parts that fit together are tight, so make sure that your printer’s X-Y Hole Compensation calibration is set.
As always, happy printing!