1 / 1
Adafruit car horn - part 1 - box for FX sound board
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box for Adafruit Sound Board
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
The Car Horn project:
I'm starting with a box for the adafruit sound card.
Features:
- hole for 12 pin connector → 10 position switch for selecting sound.
- hole for audio jack
- hole for usb micro
- handles with holes. I can either use velcro straps or fasten in place with screws.
- 4 mounting posts for the sound card
- 4 m3 nuts & matching 25mm screws to attach lid