1 / 2
Anvil Offroad Jeep Bar - Auxbeam and Tablet mounts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple mounts for the Anvil Offroad dash bar
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 276
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Everything uses 5mm bolts to thread into the plastic
For the auxbeam panel, print two for mounting. It uses the stamped metal backing plate on the panel itself.
For the tablet mount grab this tablet mount and disassemble the vent mount. Unscrew and remove the ball post. It will fit onto the square post of the print