Banggood frequency sniffer case. 500mhz Frequency meter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bought a frequency scanner to get the frequencies used by other companies we work with. It came as a bare board with…
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 30
- Wydruki
- 1
- Wyświetlenia
- 481
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Bought a frequency scanner to get the frequencies used by other companies we work with. It came as a bare board with no case so I made this!
Print Settings
Printer:
Monkey Shit Fight
Rafts:
No
No
Resolution:
.2
.10
Filament: Do not click this. See below for real link PLA Red
Notes:
I use a 5 mm brim. Two layers top and bottom. %10 infill. If you over-extrude you're not going to fit this together. I don't know if I will ever get it apart! I added some foam to cushion the board and keep the battery from moving around. I included the Sketchup files if you need to mess with them (like to fit a different antenna) . You will also need a small L type male SMA antenna for this to work with the slip case I made. The 90 degree one fits in and is protected by the slip cover case.
Reprap Warehouse is where I got the PLAhttps://www.reprapwarehouse.com/
Category: Electronics