Mini Lincoln Log Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
60% scale version of my interpretation of Lincoln logs. Like the real thing, only smaller and plastic.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 656
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a model of a mini, printable version of the Lincoln Log set I had as a young whippersnapper.
No supports needed on any pieces.
There's a small flat on the logs that allow you to print without a brim. I get the poor adhesion to bed alert message before printing but did not have any issues with the print messing up, but:
I had 3 of the longer pieces that randomly warped at one end, but pieces were still usable. I started printed few pieces per build plate (like 2 max of the longer pieces) and it seemed to clear up. You may want to try different settings if needed.
I did try a few pieces with a brim but found it too tedious to clean the pieces and it made the flat larger which took away from the log vibe.
I also included the floor or flat, half pieces that start the build in case you wanted to add another room or fence, or whatever you can imagine.
All pieces scaled down to 60% of actual manufactured pieces. Anything smaller felt too chintzy and bigger was not a wise use of filament in my opinion.
Cheers!