1 / 2
Krups Vivo F880 portafilter handle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replica of outer handle and basket clamp for my old Krups F880.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Stock handle became cracked, so I've replaced it. Original inner handle bar was OK, as it is made of PA-CF.
Handle is designed to be printed vertically. No supports needed for the upper end, but some are for openings.
Clamp needs supports.
I've printed them with PETG.
UPD: you may need to file down a clamp, if it prevents puck from falling out. Like I did…