1 / 3
Feet support for QUECHUA MH500 foldable camp chair — zdjęcie 1
1 / 3

Feet support for QUECHUA MH500 foldable camp chair

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Feet support for bigger surface area for the QUECHUA MH500 chair.

Ocena
0 / 5
Polubienia
7
Pobrania
63
Wydruki
0
Wyświetlenia
374
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Feet support for bigger surface area for the QUECHUA MH500 chair. ( or potentially other chairs with a 22mm OD leg.) 

this model can be used with the original legs,  no modification or removal needed on the chair itself. 

due tight tolerance, the support will stick and will not to off when lifting the chair, but still easy to remove for transport. 

it it doesn't, some electrical tape around the leg will do the job. 

 

adviced to print it in PETG, but PLA should work as well. 

Model in pictures is printed on draft mode (0.3 layer highed  & 15 % fill) 

 

 

Tagi