00 Capsules filler (Reduce waste, universal resize)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Capsule filler 00 that is easy to print and clean, reducing waste of filling powder.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 744
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This simple, 3D-printable capsule filler is designed for ease of use and minimal powder waste. It prints easily, requiring only brims for some parts (no other supports needed). Unlike many small filling machines with fixed powder-blocking strips that can cause mixture to get stuck, this design offers the option of removable bands to prevent this issue. Alternatively, you can print it without bands and fill capsules on a surface where excess powder can be easily collected.
For best results, print the "Main_plate" face down on a smooth surface like glass to minimize powder sticking and staining. The "Main chamber" is designed to press-fit into the "Main plate" without glue, providing a secure hold. Gluing the "Packing tool handle" is recommended. This design is compatible with various printing materials; PLA was used for testing.
The design is easily scalable for different capsule sizes. The current opening for the capsule bottom is 8.6 mm (#00 size), and it has been successfully resized for capsule #4 (approximately 61.5% of the original size).