1 / 5
Toilet flapper assembly nut wrench. 86 mm for a 2 inch flush valve.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Toilet was leaking, needed to replace the flapper valve assembly. Didn't have the right tool for the gigantic nut…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 41
- Wydruki
- 1
- Wyświetlenia
- 468
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (13)Powiązane
Toilet was leaking, needed to replace the flapper valve assembly. Didn't have the right tool for the gigantic nut under the flapper valve so I made one. Fits a 2 inch flush valve nut, not a 3 inch one.
Instructions
PLA, 4 shells, %60 fill. .4mm layers because it doesn't have to be pretty.... it just has to work. Thicker layers seem stronger anyway.
Category: Bathroom