1 / 5
Bowden Tube Clip for Creality K2 CFS
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you have experienced problems with the bowden tube popping out of the CFS, this may help. Printed in TPU
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 318
- Wydruki
- 0
- Wyświetlenia
- 1040
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (86)Powiązane
If you have experienced problems with the bowden tube popping out of the CFS, this may help.
Printed in TPU with at least 4 wall loops and 6-8 top and bottom shell layers.
Layer height is 0.1 mm