SODYs3D Lightwight PLA TEST Wall and Weight

More Infos at SODYs3D.comLW-PLA Test and 

Dear Community,

I have created three different test parts to print and determine the wall thickness and weight when using foaming lightweight PLA. The goal of these tests is to analyze the performance of various lightweight PLA filaments under similar conditions and identify differences in weight, wall thickness, and print quality. Additionally, I compare the data to determine which filament performs best regarding weight reduction while maintaining structural stability.

Test Parts Overview

The three test parts I designed are as follows:

1. Test Cube (Vase Mode) - Used to measure the wall thickness accurately and evaluate the foaming effect of the filament. This part helps determine the optimal extrusion factor for each filament.

2. Wing Test Part (2D Lattice/Gyroid) - Designed to test the structural integrity and weight reduction when applying different infill patterns. The part includes a 2D lattice or gyroid pattern, allowing for lightweight yet stable constructions.

3. Fuselage Test Part (Gyroid) - Represents a typical aircraft fuselage structure with a gyroid infill pattern, suitable for evaluating filament performance in larger, more complex geometries.

Filament Comparison

I compared the performance of various lightweight PLA filaments from different manufacturers, including:

• 3DLabPrint Lightweight PLA

• ColorFabb Lightweight PLA

• eSUN Lightweight PLA

For each filament, I tested multiple colors to assess the impact of color additives on foaming and wall thickness. The target wall thickness varied slightly between filaments due to differences in material properties and extrusion factors.

Let me know if you need more details or specific results!