1 / 1
Kobra Go Hero Me Gantry Adapter End Stop Fix & Reinforcement — zdjęcie 1

Kobra Go Hero Me Gantry Adapter End Stop Fix & Reinforcement

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Kobra Go Hero Me Gen7 Gantry Adapter End Stop Fix & Reinforcement (7mm thick)

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
77
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I upgraded my Kobra Go to the Hero Me printhead, but there is a problem with the endstop and the gantry adapter is too flexible. So I added x endstop trigger point and increased the thickness and moved the z position of the printhead mounting point a bit higher (center mass). I am using an E3D Volcano Clone hotend and Headsenk.

Tagi