1 / 1
Reworked fretboard and nut for Tomek's Hex Ukulele — zdjęcie 1

Reworked fretboard and nut for Tomek's Hex Ukulele

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I have separated the nut from the fretboard on Tomek's excellent Hex Ukulele.

Ocena
0 / 5
Polubienia
3
Pobrania
16
Wydruki
0
Wyświetlenia
176
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Share Alike

On my most recent make of Tomek's excellent Hex Ukulele, I messed up when widening the nut slots with a set of nut files which I had I bought for that very purpose. In short, I widened one slot just a little too far and ended up with a nasty fret buzz on the offending string.

What I decided to do was to redesign the original piece. I removed the nut from the fretboard and created a separate nut piece so that I could experiment, adjust and play around with the nut slots without having to reprint the entire fretboard  with its integrated frets and a nut.

As I use CURA as my slicer of choice and use a dual printhead machine, I present separate files for the frets (which include the locating piece for the nut) and fretboard as well as the nut itself. I also include a file holding the frets, locating piece and fretboard so that this can be printed with a colour change after 3.5mm height as in the original.

Tagi