Mazda 3 BP (2019-) Dashcam mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting hardware for rear dashcam + cable clips for A pillar
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 607
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've installed a 2 channel dashcam into my 2024 Mazda 3 BP.
Because I didn't want to stick the rear cam to the headliner or the rear window, I designed the bracket, that slips between the car's roof and headliner.
Update: I've reworked the plate and removed part of the visible plate because it kept warping during summer and the camera fell down. The new design has a shorter plate, which might help with warping. There still is enough clearance for the camera when the boot lid is closed.
In addition, I also created some cable clips to help with cable management of the 2 dashcam cables along the a-pillar without having to remove anything.
I printed both models with greentec pro because is easy to print, it should resist high temperatures and is stiff enough to prevent vibration on the rear camera.
I have printed the clips with:
- 0.4mm nozzle
- 0.3mm layer hight
The plate with:
- 0.6mm nozzle
- 0.3mm layer hight
It should be printable without skirt/brim.