DIN-Rail Adapter for Homematic IP flush mounted actuators HMIP-FSM, HMIP-FSM16, HMIP-FSI16, HMIP-FROLL, HMIP-FBL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIN-Rail Adapter for Homematic IP flush mounted actuators HMIP-FSM, HMIP-FSM16, HMIP-FSI16, HMIP-FROLL, HMIP-FBL
- Ocena
- 4 / 5
- Polubienia
- 12
- Pobrania
- 118
- Wydruki
- 1
- Wyświetlenia
- 330
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As there's no DIN-Rail actuator available which support power measurement, HMIP-DRSI1 is far too expensive for its little set of features and there's also no single channel shutter actuator, I needed to use the flush-mounted actuators in the cabinet.
First I printed some DIN-Adapters for Shellys and fixed the actuators with double sided tape - not really convinient, as I found no suitable model for free.
There's a guy who sells a printed adaptor, but shipping was too expensive, model not really what I liked and he rejected to sell the model to me to print myself.
So I decided to design my own and share to the community for free.
This one fits for all flush mounted actuators from Homematic IP, is 35mm wide which eaquals 2 modules like a L+N circuit-breaker.
Height is compareable to standard RCDs and circuit-breakers,
terminals are accessible in mounted condition for HMIP-FSM, but not for HMIP-FROLL and HMIP-FBL - these need to be connected prior monting. Space for cabling is enough.