Tamper for Flair Signature/Classic/Neo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Espresso tamper for everyone's favorite compact lever machine
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here are a bunch of variations on parts for a Flair tamper, intended for various combinations of multimaterial printing.
For single-material printing, just print flair tamper.stl on its own, ideally in PETG.
For multimaterial, there are a few specific intended combinations:
flair tamper grip.stl+flair tamper core.stlflair tamper conic inlay.stl+flair tamper conic core.stlflair tamper 3 globe.stl+flair tamper 3 core.stl
For any of these combinations, they should be loaded together into PrusaSlicer/BambuStudio/etc. as a multi-part single item, and then you can color the pieces individually. The core parts should be printed in PETG (transparent is best!) while the accent parts can be printed in other materials such as TPU to change the grip, and even PLA should be fine, as they do not need to chemically bond to stay intact.
All parts should be printed with 100% infill.