RigExpert Stick (all models) extended cover with strap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An extended cap with a strap that fits on a RigExpert Stick with an SO239 adapter attached
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 217
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created an extended cap for the RigExpert Stick analyzers that works with the SO239 adapter attached and has a loop that allows you to keep it tethered to the bottom loop on the analyzer.
There is a little bit of a lip that doesn't print the best but helps in keeping the cap snugly attached to the top of the analyzer. Feedback on the thickness of the bottom loop would be appreciated. Let me know if it becomes a week point and I can thicken it up.
Printed using TPU .2mm layer height with a .4mm nozzle. This should be printable on the MK3/4 series of printers if you turn the model diagonally.