Brother XL 3010 Selecting Gear #X59155051
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement selecting gear for Brother XL 3010 Sewing Maching
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed this to replace the broken selecting gear in a thrifted Brother XL 3010. I'm still working on putting the machine back together, I'm not even sure it works really. But the gear does mesh with the selecting mechanism, and everything there seems to work. If you have to replace this gear, good luck. Getting the pattern selection module out was a pain. Pretty sure I got it all back together correctly now, so if you get stuck let me know and I will try to help!
The hole should be sized just right to press the shaft in. I squeezed it in place with a vise. Printed in PETG with 3 walls and 100% infill. Hope it holds up!