Case for ElectroCookie Half Size Breadboard Style PCB (6P+T-CNT)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for ElectroCookie Half Size Breadboard Style PCB (6P+T-CNT)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Case for ElectroCookie Half Size Breadboard Style PCB (6P+T-CNT)
In ‘case’ someone else finds this useful.
95 x 60 x 25mm
2 versions:
- Blank end.
- End with USB slot at 10.5 -> 18.5 MM
1.6 mm pilot holes through the M2 posts and cover screw protrusions
2.5 mm pilot holes through the M3 posts
Louvers on sides and one end. Provides ventilation and reduces filament use.
Be gentle when tapping the screw threads and/or use your slicer to add a cylinder modifier with 100% infill for the posts through the bottom. It’s a good idea to run the appropriate drill bit through the holes before tapping. At my house they end up a little smaller during the journey from Fusion -> Slicer -> Printer.
Use your slicer to add a negative-volume cylinder or box and place it through the surface or bottom wherever you want holes for switches, wires, mounting screws to something else, ectara.
Supports are not required.