XOL Rapido2HF Vindr Neopixels 3010 Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
XOL Rapido2HF Vindr Neopixels 3010 Fan
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 61
- Wydruki
- 1
- Wyświetlenia
- 483
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Added Neopixels in place of the Sequin part lights. Moved Neopixels closer to the front to better illuminate the nozzle and parts. Extended the skirt in front to hide the LEDs. I have a bunch of Neopixels on hand and they are much brighter than the Sequins. This also uses the 4010 Vindr fans from West3d, which are nice. And it uses a 3010 hotend fan instead of the 2510. Props to grafit.xyz and Recyclops7590 for their nice designs, which I remixed (3010, Vindr).
Wire it with #1 Neopixel as the Logo, and #2 and #3 as the part lights, just like a StealthBurner. Use 200mm wires from toolhead board to Neo#1, 135mm wires from Neo#1 to Neo#2, and 35mm wires between Neo#2 and Neo#3.
Print with supports. I had to use some support blockers to avoid too many supports.