even more simple box for vase mode
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Essentially this is the "simple box for vase mode" made by vintrlos but closed
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 446
- Wydruki
- 5
- Wyświetlenia
- 1282
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Essentially this is the "simple box for vase mode" made by vintrlos but closed. I thought the original design was really good but it was a bit to flexible when printed it with PLA. So I took all my nonexistent skills and put it into blender to close the “hole" in the front. By doing this your print time will go down a good bit because your printer is now essentially doing just squares instead of the more complex movement the original had. I printed this with a 0.6mm nozzle, 0.48mm layer height, 2 wall lines, and a wall thickness of 1.2mm on my highly modded creality CR-10 in just about 1:34h. It takes an overall 37g of filament. So yeah it's a bit more than the original but you get a IMO more sturdy package. The next step would be to make this stackable but that wouldn't really work well with vase mode IMO. Essentially I use this now to create storage space while also using up leftover filaments.
Anyways all credits go out to the original model maker vintrlos. You can find his original design here