Eiffel Tower K-Cup Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
A k-cup holder perfect for storing your French roast!
I made a k-cup holder that uses the tower posted by LeFabShop as a frame for 2 holders that are glued in place. I simply scaled the tower up 4.5X to 202.5mm tall. I created some supports for the arches since I was concerned that could be a bit messy without. With my supports it printed pretty nice.
remix of:
https://www.thingiverse.com/thing:311002
Print instructions
Category: Household Print Settings
Rafts: Doesn't Matter
Notes:
I suggest .15 to .2 mm layers and 3 to 4 perimeters if you are using a .4mm nozzle. 15% infill is enough for the tower. I printed the holders with a higher infill- I think it was about 30%.
I have provided two options for the tower. One without supports that you can add your own supports to as you like and one with my support structure.
Post-Printing
Remove supports from the tower (if you used my supports). I worked an exacto knife between the supports and arches and carefully cut & worked them free.
Glue the holders in place. The top holder was a good snug fit for me, but could be a bit tight depending on your printer.