1 / 4
Honeycomb Wall Mount for Omada ER7206
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Could only find larger brackets with controller attachments. This is meant to be easier to print and install.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
HoneyComb Wall Mount for Omada ER7206
This is my own solution for mounting this unit to the standard HSW setup. It can also be used to just screw the unit to a wall, though the screw holes are made specifically for M3 x 8, button head screws.
Printing settings I used:
- Printed both models with largest side down.
- PLA
- 0.2 Layer height
- Standard Prusa PLA Settings
Installation (HSW):
- (4) M3 x 8, button-head screws (M3 x 10 should work as well)
- (4) HSW M3 Fastening inserts (Part of the standard HSW collection)
Usage:
- I found it easiest to insert the bottom one first, then insert the top one with the router already resting in-between.
- One on the bottom is probably enough if you somehow support the top from tipping outward.
- Designed to work vertically (like in the pictures) with the HSW, but if you fasten it directly to a wall, you could use it horizontally, as long as the correct, more supported side is down.