2020 and 1515 Extrusion Finish Savers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Temporary feet to protect the finish of your frame from your work surface.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
A few of the frame's I've ordered have had fairly thin anodizing that was prone to picking up scratches during the build process.
I came up with these temporary feet so that I could lay the printer on any of its side without my work surface scratching the finish on the extrusion all to hell.
For 1515 extrusion printers, you can use your pre-loaded no-drop nuts or if you have an LDO frame, their drop-in square nuts.
For 2020 extrusion, hammerhead nuts work well enough.
For all printers, I recommend using 4 feet minimum to prevent it wobbling.