Red dot finder mount for Celestron/Oberwerk large binoculars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount a reflex red dot sight to Celestron/Oberwerk binoculars on 15mm or 19mm rail
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 119
- Wydruki
- 1
- Wyświetlenia
- 1294
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution
I got a red dot finder with a telescope - don't even know what this mount is properly called though it seems common. Looks a lot like a "Celestron Star Pointer" but is not branded. It looks very similar to the "Orion EZ Finder II Telescope Reflex Sight" too. I have some large Celestron 20x80 binoculars that have a 15mm metal rod where the tripod mount connects. This clamp attaches to the metal rod and allows a red dot sight to mount on top of the binoculars. So much easier to get a star in the eyepieces with the finder attached!
(There is now an alternate STL that fits on a 19mm rail, I am told this is what you need if you have Oberwerk 20x80mm large binoculars. Choose the body named "Mount-Oberwerk-19mm", use the knurled knobs and M5 hardware just the same.)
25mm M5 nuts and bolts clamp the mount to the binoculars then the wedge slots into the bottom of the finder. You may be able to use an imperial bolt size but just buy the metric. Print the knobs in 0.2 layer height at least, the knurling comes out much better. I printed the mount at 0.3.