FFCP to Octopus v1.1 adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This allows a BTT Octopus main board to be fitted to a FlashForge Creator Pro printer.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
The original design was created with the intent of modifying the case to allow external access to the SD slot and USB cable port. However, I don’t have any need for that, so I moved the board to the left allowing the usb cable to be plugged in internally.
I also removed the board standoffs to provide clearance for the driver heat sinks when the case bottom is installed. This also allows the mount to be printed flat. I do recommend adding 1-2mm washers, though, so the solder side of the board has clearance.
Thank you to @dmitryr for his tireless work on the mIDEX and other projects!
Don’t judge me for the wiring…this is still a work in progress. 😬