1 / 1
Sovol SV01 Pro Y Axis Bed MGN12H Carriage
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keeps each MGN12H block independent
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Should be easier to adjust on installation than a monolithic design, and is low enough to keep the Y belt parallel to the axis.
Available in double or triple MGN12H block configuration.
(Want to do two blocks on the left and one on the right instead? Use your slicer's mirroring feature.)
Print with enough walls and infill in something that's suitable for printer parts such as PETG or ABS.
Bill of Materials
- 8 or 12x M3x6 BHCS or SHCS
- 4x M4 nuts
- 4x M4x12 screws
- 4x M4 washers