1 / 6
Voron Anthead Dual 4010 Fan Splitter - JST PH2.0 — zdjęcie 1
1 / 6

Voron Anthead Dual 4010 Fan Splitter - JST PH2.0

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of Esotericals great work on his fan wire splitter for various toolheads and toolboards JST PH 2.0 ONLY

Ocena
0 / 5
Polubienia
27
Pobrania
74
Wydruki
0
Wyświetlenia
1011
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Remix of Esotericals great work on his fan wire splitter for various toolheads and toolboards

 

JST 2.0 ONLY in this remix 

Printed w/ .4 nozz @ .4 line width @ .12 layer height.  First layer being dialed in is crucial for the holes the pins go thru.

Once printed, insert the JST PH 2.0 FEMALE connectors pins thru the holes - solder on bottom + / - together, then solder +/- lead wires that run to your crimps on the toolboard.

 

After soldering was done - I used hot glue to seal the work and inserted the holder into the main base and they were then glued together.  Semi decent solder skills may be required.  Wire this at your own risk.  I accept no responsibility for your toolboard s fan mosfets :-) 

 

Tagi