Peg Board Filament Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printable spool holder designed for traditional peg boards
- Ocena
- 5 / 5
- Polubienia
- 153
- Pobrania
- 867
- Wydruki
- 8
- Wyświetlenia
- 4931
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I thought https://www.prusaprinters.org/prints/116706-filament-spool-holder-for-ikea-skadis was a great idea but wanted to use it with a traditional peg board (at least in the US - 1" x 1" grid)
I've printed it in PLA with 3-4 perimeters but PETG/ABS would probably be more suitable.
Supports are required for the top pegs, I suggest using the new snug supports in PrusaSlicer 2.4
I've only included a single stl but two different orientations are required to print both sides. I used the slicer's Mirror functionality to create the opposite side.
I've included a 3MF that has the perimeters/supports/mirroring already configured.