Sturdy handle for 3Demon's Stamp Wheels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3Demon's Stamp Wheel compatible handle. optimized for use of the stamp wheels in pottery.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I designed this handle for a potter who wanted to try out using 3Demons excellent collection of stamp wheels, but felt that the standard handle is a bit too flimsy for use comfortably for pottery.
https://www.printables.com/@3Demon_tools_1348681/models?search=wheel
The handle is as of yet untested, if I forget to update later, feel free to ask me how it went.
print both parts. you will need an M8 stud or bolt of at least 25 mm long. if you use a bolt, the bolt head can just sit outside the main body of the handle, should not impact performance much. If it is longer, it will just stick out more the other side (and make it a bit harder to take the lock plate off)
you just put the wheel in, screw in the lock head, turn until you feel the wheel has the right amount of play vs. rigidity and its ready to use.
the M8 threads are printed, i cleaned them out with an M8 tap before installing the stud. you might be fine just threading it in like that, your results may vary depending on your printer. it can help to lightly grease and heat up the bolt/stud a bit first. Threading it into the lock should be fine, and more resistance there is better. not sure about the body, that thread is longer and more rigid, but also not really required. you can drill it out and glue.
Let me know if you want a ‘glue in’ version, to glue the bold into the body instead, which should be easier to fit. or an imperial thread version or a plastic thread version, which should work as well i guess.