Gambit & Rogue Hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Hueforge of everyone's favourite Xmen - Gambit and Rogue.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 130.05x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Kingroon Red Transmission Distance: 4.2
PLA BambuLab Matte Latte Brown Transmission Distance: 2
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
This print uses 5 unique filaments
For the lighter colour version:
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #13 (1.12mm) swap to Latte Brown
At layer #14 (1.2mm) swap to Pure Yellow
At layer #15 (1.28mm) swap to White for the rest.
For the darker colour version:
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #14 (1.2mm) swap to Latte Brown
At layer #15 (1.28mm) swap to Pure Yellow
At layer #16 (1.36mm) swap to White for the rest.