1 / 24
Holder Tractive GPS tracker
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is a holder for the Tractive TG4XL GPS tracker, which is designed to be attached to the animal's collar.
- Ocena
- 0 / 5
- Polubienia
- 8
- Wydruki
- 0
- Wyświetlenia
- 542
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Standard Digital File License
Holder Tractive GPS tracker
This model is a holder for the Tractive TG4XL GPS tracker, which is designed to be attached to the animal's collar. The holder consists of two parts which are connected to each other by three screws.
Material required:
- 3 pieces screw m3x6 mm or m3x5 mm ( ideally with hemispherical head)
- 3 pieces Threaded inserts - M3 short (m3x3 mm) (https://www.prusa3d.com/product/threaded-inserts-m3-short-100-pcs/)
Print Recommendations:
- printing material: PETG
- print layer height: 0.15mm
- fill density: 50%
- filling pattern: rectilinear
For the MK3S+ printer and Prusament PETG material I provide here a preset slicer.