Compartmented case for metal punches
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a sturdy box for a set of metal letter/number punches, with flush lettering on its lid
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This case fits a set of Hiltex metal punches. They are heavy--their original case quickly broke at one corner as it was not strong enough. If it does not fit your set, use the scaling capabilities in the slicer to adjust it. Pro tip: cut a short slice of the box grid to print as a test for fit if you are in doubt. Due to all those partitions, this is a long print.
Set up the box for printing on its base. Set up the lid, if you want to use my lettering design, on its face, with black mapped at #1 and white at #2 (or whatever colors you prefer). I used petg for durability. I've included my sliced gcode for the lid.
I attached rubber grip mat to the bottom of the case so it would not slide off a metal counter top.