Box for Shooting Glasses
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Old design was broke, so I redesigned a stronger, more rigid box.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 345
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Old design was broke, so I redesigned a stronger, more rigid box.
File section contains:
- Main box
- Lid with pocket for individually designed plates (for names, brand names, etc.)
- Lid without pocket
- Plate with text “Shooting Glasses”
- Plain Plate for your individual experience
- Latch redesigned for better fit
I printed my lid with pocket with basic support under the pocket. I used Bambu PLA support filament for the interface. Print and supportet structure came out nicely. For axles I used 35 or 36mm M3 dowel pins. Note: The holes for the pins (Ø3mm are very fragile!). This is a adisadvantage of the design. Maybe printing on the side would be better, with much support?
In the box I put some foam pieces for not damaging glasses during transportation.
Printed with Green Matte Geeetech filament on my Bambu A1. Plate printed on my MK4 with MMU3. I re-printed the lid, now in standing conditions. The eyelets were too vulnerable. Standing requires double filament for supports, thanks to PLA-support-filament (Bambu) all supports could be removed easily. Now the eyelets are much more rigid, I have no fear that they might break.
Thanks to Yanev for this great design!
Explore my other Printables: https://www.printables.com/de/@Tritschi