Voron 2.4 stealthchanger umbilical clips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small clips to hold together the cable, PTFE tube and spring steel wire
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 166
- Wydruki
- 1
- Wyświetlenia
- 695
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Checked a few models online, none quite fit my idea perfectly and most where a bit bulky for my taste. I took some ideas and modelled these to fit tightly and be as small as possible while sturdy enough.
Print the parts in the orientation they are saved, use standard Voron ABS settings, 100% infill.
I tested them and they fit perfectly a normal 4 mm PTFE tube, the standard BTT SB2209 CAN bus cable plus small twisted pair in a mesh sleeve and a 0.8 mm spring wire for added rigidity. The fit for the piano wire is very tight but I liked it that way, maybe you could tweak the scaling a little if you find it excessive.
I haven't finished my build yet, don't know how they will perform in actual use.
I found the 0.8 mm wire a little flimsy I decided to try 1 mm and I've uploaded the new part (no STEP for this one though)