1 / 1
Windeisen M12 (vierkant 7) / Tap wrench M12 (square 7)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Zum Nachschneiden von Gewinden / for re-cutting threads
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
Material: PLA+
Druckereinstellung: Layerhöhe 0,2 mm / Infill 50 % / No Support
Kein zusätzliches Material erforderlich / no additional material required
Gutes Gelingen und über ein Like würde ich mich freuen.
Good luck and I would be happy about a like.