1 / 1
Windeisen M16 (vierkant 9) / Tap wrench M16 (square 9)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Zum Nachschneiden von Gewinden / For re-cutting threads
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Material: PLA+
Druckereinstellung: Layerhöhe 0,2 mm / Infill 50 % / No Support
Kein zusätzliches Material erforderlich / no additional material required
Gutes Gelingen und über ein Like würde ich mich freuen.
Good luck and I would be happy about a like.