Deep Space 9 - Terok Nor LED lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A model of DS9 that can be fitted with led strips, to be printed in two halves plus a screw and a nut to tie them
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 116
- Wydruki
- 1
- Wyświetlenia
- 1065
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Share Alike
The led rail came out a bit narrow, it fits 8mm strip but nothing bigger
It is meant to house three pieces of strip facing outwards in the exterior ring and three shorter ones facing downwards in the radial bridges, with an usb to dip (https://www.amazon.it/gp/product/B07RDHNL9H/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1) to power it and a small switch (https://www.amazon.it/gp/product/B07Z4RW9X6/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1) right above the connector.
The cap and screw tie together top and bottom, the key is optional, just a small piece to be inserted in one of the radial led rails to prevent the two halves from losing alignment, it's sized according to my led strip thickness if yours is thinner just print it a bit taller.
Supports needed