Prusa Core One side mounted 6 build plates holder upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side mounted build plate holder for 6 build plates Slot sizes for build plates: 1.00mm-1.60mm
- Ocena
- 4,885 / 5
- Polubienia
- 213
- Pobrania
- 1033
- Wydruki
- 26
- Wyświetlenia
- 5139
- Oceny
- 26
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Side-mounted build plate holder for 6 build plates.
Designed with holes for 10x2mm magnets, but can also be attached to the printer using double-sided tape.
Slot sizes for build plates:
1. 1.00mm
2. 1.00mm
3. 1.00mm
4. 1.20mm
5. 1.50mm
6. 1.60mm
I created small holes for the plates because I got a few from AliExpress that are very thin (0.6mm). During printer operation, they were shaking a lot in the 1.6mm slots and hitting each other, which caused some noise, so I added a few 1mm holes.
Just in case, I uploaded the FUSION 360 project so that anyone can change the size or remove the magnet slots if they wish. Thank you!