Cyclone Dust Separator for 3 inches tubes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cyclone dust separator that fits to 3 inches tubes/hose systems. Inlet and outlet inner diameter is 76.1mm
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 172
- Wydruki
- 0
- Wyświetlenia
- 830
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Most of models available for download are created for 2 ½ and 4 inches hoses and none of them is a parametric model. So I decided to create a dust separator that fits to 3 inches dust collector systems. It is a bit large, and maybe you will need to slice the parts. If you have a printer with a 300mmx300mmx300mm bed size, I believe it will fit without slicing. I added some holes to assembly the parts using screws but you can glue them instead. The inlet and outlet diameter are 76.1mm. So a 3 inches tube can be inserted and used as a connector between the cyclone and the hose.