Z Endstop Parts for Microswitch on Hypercube Evolution
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made this for my Hypercube Evolution where I am using micro switches for homing everything.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Made this for my Hypercube Evolution where I am using micro switches for homing everything.
I've got mine mounted for Z max homing, but they will work for Z min just as well.
Print instructions
Category: 3D Printing Print Settings
Supports: No
Notes:
They should be in the right orientation for printing.
You may need to mirror the switch bracket depending on where you mount. - Mainly depends where you want the cable tie feature to be.
Post-Printing
A long 4mm screw goes in the screw bracket. It is intended to go in very tightly so it doesn't move on you later.
The screw is supposed to make contact right above the red button on the switch for optimal accuracy.