1 / 5
Aktive Trocknung M-1J1R für (Ikea) Trockenbox — zdjęcie 1
1 / 5

Aktive Trocknung M-1J1R für (Ikea) Trockenbox

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Gehäuse für M-1J1R und SNZB-02D für Montage an Trockenbox (z.B IKEA).

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
77
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

Gehäuse für M-1J1R Luftentfeuchter und Zigbee Hydrometer Sonoff ZNZB-02D. Das Gehause wird an eine  Filament Trockenbox montiert und senkt die Luftfeuchtigkeit bei Anzeige der Temperatur und der aktuellen Luftfeuchtigkeit in der Trockenbox.. Der Sonoff Sensor kann einfach in Homeassistant eingebunden werden.  Über das VR2 Modul wird der M-1RJ1 und der Sonoff sensor mit Spannung versorgt.

Der ZNZB-02D wird aus dem originalen Gehäuse entfernt und in das gedruckte eingesetzt und die Stromversorgung an die Batterieanschlüsse angelötet. Display und Gehäuse werden mit Dichtungband aus Moosgummi abgedichtet(siehe Bilder). Die Kabeldurchführung sollte ebenfalls abgedichtet werden (Moosgumme/Heißkleber).

Stückliste: 

  •  1 x M-1J1R

  •  1 x VREG-2 USB-C

  •  ca. 1m  Moosgummi 5x2mm oder 5x3mm 

  •  6 x Senkkopfschrauben selbstschneidend 2x16mm

Housing for the M-1J1R dehumidifier and the Sonoff ZNZB-02D Zigbee hygrometer. The housing is mounted on a filament drying box and reduces the humidity while displaying the temperature and current humidity inside the drying box. The Sonoff sensor can be easily integrated into Home Assistant. The M-1J1R and the Sonoff sensor are powered via the VR2 module. The ZNZB-02D is removed from its original housing and inserted into the printed housing, and the power supply is soldered to the battery terminals. The display and housing are sealed with foam rubber sealing tape (see pictures). The cable entry should also be sealed (foam rubber/hot glue).

Parts:

  • 1 x M-1J1R

  • 1 x VREG-2 USB-C

  • Approx. 1m of foam rubber,

  • 5x2mm or 5x3mm 6 x countersunk self-tapping screws, 2x16mm

Tagi