1 / 1
Incense Stick Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Base and stick for assembling a Incense Holder.
- Ocena
- 0 / 5
- Polubienia
- 43
- Pobrania
- 211
- Wydruki
- 0
- Wyświetlenia
- 683
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (52)Powiązane
A modern, vertically designed incense holder. Its minimalist aesthetic not only adds elegance to any room but also ensures an efficient ash collection!
Key Features:
- Two-Part Design: The holder and clamp are designed to be printed separately for optimal print quality. This approach ensures a precise fit and correct functionality.
- Secure Assembly: The handle fits snugly into the tray with a 0.15mm tolerance, eliminating the need for adhesives. However, applying a small amount of glue can provide extra stability if desired.
- Warp Prevention: The handle's slim 5mm profile requires careful cooling to prevent warping. It's recommended to allow the handle to cool completely before removing it from the print bed.
Printing Recommendations:
- Print Orientation: Print the handle and tray on separate build plates to ensure the clamp's precision and overall print quality.
- Cooling Tips: To prevent warping, especially for the slender handle, consider the following:
- Take your time: Be sure to wait until it cools down on its own.
- Ambient Temperature: Maintain a stable room temperature to ensure even cooling.
- Enclosure Use: If available, print within an enclosure to minimize drafts and temperature fluctuations.
If you like the model, don't hesitate to like it, and if you want to Boost, you're more than welcome! :)