5/8 (.625) in Mill T Slot Covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
T Slot covers for 5/8" tables for ease of cleaning. Tested w/ HAAS and Acer Mill tables. Designed for use with 95A TPU.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 101
- Wydruki
- 1
- Wyświetlenia
- 300
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
T Slot covers for 5/8" tables for ease of cleaning. Tested with HAAS and Acer Mill tables. Designed for use with 95A TPU. No Supports required. CAD Models attached. I used NinjaTek Cheetah 95A using the supplied profile from Prusa.
These are designed so that they can be snapped into place from the top (does not need to be slid in from the end). When snapped into place the height of the cover is below the surface of the mill table so that it does not interfere with fixturing tools.