Filament Transfer Device Diamond Screw Update
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix to make the diamond screw easier to print
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 261
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The diamond screw for the original was very hard for me to print cleanly, so I made some updates.
Print the Shafts with supports. The hex-shaped connectors are marginally taller than they are wide (1mm) so they only fit one way.
Split the diamond screw yourself and add connectors to make sure it's aligned correctly. I've added a screenshot that shows the connector characteristics I used.
The diamond screw shouldn't need supports after it's been split.
OR
Use the 3mf included
I've included a drive as well, because, for whatever reason, I don't have a ¼" drill driver for my sockets.