1 / 5
Insert for Raiders of Scythia
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed insert for the board game Raiders of Scythia
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 801
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (20)Powiązane
I loved piekarz519's insert on Thingiverse, but I felt like the spacer for the loot bag used too much filament and some of the trays were too tight for my pieces. The only file I didn't touch was RoS_resources.stl. See below for the summary of files:
- RoS_cards_rmx.stl and RoS_wound.stl - These two files separate the wounds tray from the card tray, allowing you to keep the card tray in the box while playing
- RoS_loot_rmx.stl - This reduces the filament usage compared to the original
- RoS_dices_rmx.stl - The original file was too tight in all compartments for me, so all compartments have been slightly widened. Only use this file if the original isn't working well for you
- RoS_divider_xx.stl - There are four files that start with RoS_divider. These are small dividers you can use to separate the cards in the card tray for easier setup. The dividers stay completely inside of the card tray and do not interfere with other trays. For best results, print with a 0.25 nozzle