Windy City Tenor Saxophone Mouthpiece Series 64 - Modification
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my modification of the Windy City Tenor Sax Mouthpiece. It adds a length extension and an optional chamber mod.
- Ocena
- 2 / 5
- Polubienia
- 13
- Pobrania
- 471
- Wydruki
- 1
- Wyświetlenia
- 1489
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
Testing the original WCW Mouthpiece, I was exited by the sound and easy playability of the 64 series.
But there was one problem: to tune the sax I had to pull the mouthpiece so far that it nearly dropped of the s-bow. So I designed an extension of 9mm.
Later I decided to try out another mod: to widen the chamber. This mod turns out to improve the sound quite a bit: It adds some brilliance to the rich bodyfull sound of the original.
The modification comes as an OpenScad file. It modifies the original .stl's, which I also include for convenience. As with all my projects, you'll need the BOSL II library in addition to a current installation of OpenSCAD (both free).
With OpenScad, you can also examine the mouthpiece cut open (Option “cross”). You might have to press F6 for a final render, the preview render might show some artifacts.
The mouthpiece on the pictures was printed using Aurapol PLA.
The included stl-files all have a length extension of 9mm. The ones with ‘mod’ in the name also have my chamber modification.