1 / 3
Aquarium Air Filter - Splash Guard
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stop your clear lid from growing algae with this splash guard made for air spong filters
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Introducing the Ultimate Air-Pump-Driven Sponge Filter Splash Guard!
I was struggling with algae buildup on my clear aquarium lid due to splashing from my sponge filter, so I set out to fix it.
After five major design iterations, I’ve perfected the solution!
✔ Minimal support required
✔ Easy to print (optimized for large layer heights)
✔ Highly effective at preventing splashes
This is, without a doubt, the best sponge filter splash guard out there!
🔹 Recommended print settings:
- Material: PLA or PETG (black preferred)
- Layer height: 0.24mm - 0.3mm
- Designed for support on the top section only—everything else is angled for clean, support-free printing.
Enjoy, and happy printing!